Backventiler

Olika backventiler

PA Ventiler har ett brett utbud av backventiler i olika montageutföranden.

Section

Ventiltypen har kort bygglängd, låg vikt och lågt tryckfall. Kan levereras med O-ring i olika material och som tillval metalltätad.

Ringbackventil (disco-back)


En ringbackventil lämpar sig väl i applikationer där flödet har en pulserande frekvens, till exempel kolvpump. Kan levereras i olika material samt tryckklasser.

Kulbackventil


Här är det den gummiklädda kulan som är den rörliga delen i backventilen. Lämpar sig väl till avloppsvatten, förorenat vatten och trögflytande media. Kan levereras i olika material.

Klaffbackventil med motvikt


Vissa typer av våra backventiler kan förses med en motvikt beroende på applikationens driftförhållande.

Kägelbackventil


En kägelbackventil lämpar sig väl för följande applikationer: ånga, kondensat, het olja, hetvatten och liknande media. Käglan är fjäderbelastad.

Bottenbackventil


Funktionen är att den förhindrar återströmmning av vatten på sugsidan i pumpledningar. Är lämplig för bevattningsanläggningar.

Återströmmningsskydd


Användningsområdet är att skydda det kommunala dricksvattensystemet mot föroreningar vid returflöde och tillbakasugning i vattennätet.

Backventiler


Kägelbackventil, klaffbackventil och bottenbackventil. Det är tre exempel på backventiler i vårt produktutbud. Val av backventil beror på vilken industri den ska användas inom. Backventiler finns i olika typer av material och montageutföranden – svetsändar, flänsar och wafer är de vanligaste inom processindustrin. Hör av dig till oss så hjälper vi till att välja rätt backventil!

Backventilen – media åt ett håll
En backventil (check valve på engelska) släpper enbart igenom media åt ett håll.Vi erbjuder backventiler i olika utföranden och material- allt beroende på användningsområdet. Hör av dig till oss för rådgivning!

  • PA 1100. Kägelbackventil PN10 – Mässing – Invändig gänga

    ,

    General Characteristics

    From DN 3/8" to DN 4". Low head loss. Multi-proposes use. Mounting in horizontal and vertical position. Excellent hydraulic result. Perfect tightness in all conditions. Silent functionning.

    Application

    General uses: water distribution, building, pumping of fuel and pumping in general,etc.

    Body material: Brass
    PN (end): PN10
    Contact sealing: NBR
    Check valve material:
    Polyamide nitril
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA1100_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 1101. Kägelbackventil PN10 – Mässing – Invändig gänga – ACS

    ,

    General Characteristics

    Range : from DN 3/8" to DN 4" Low head loss. Multi-purposes use. Mounting in horizontal and vertical position. Excellent hydraulic characteristics. Perfect tightness in all conditions. Silent functionning.

    Application

    General uses : water distribution, building, pumping of fueland pumping in general, etc.

    Body material: Brass
    PN (end): PN10
    Contact sealing: NBR
    Check valve material:
    Nylon
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA1101_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 1102. Kägelbackventil PN25 – Mässing – Invändig gänga – Anti pollution

    ,

    General Characteristics

    Range : from DN 3/8" to DN 2". Mounting in horizontal and vertical position or inclined position. The threaded type antipollution check valve has two caps, an amont cap serving for controlling the thightness of the check valve and a cap approval serving for controlling the quality of the water and possibly for purging the installation.

    Application

    General use : hydraulic or pneumatic system in industry, ideal for hot/cold water, oils, compressed air.

    Body material: Brass
    PN (end): PN25
    Contact sealing: FPM
    Check valve material:
    Stainless steel
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA1102_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 1103. Kägelbackventil PN10 – Mässing – Invändig gänga – Anti pollution

    ,

    General Characteristics

    From DN 1/2" to DN 2". Low head loss. Multi-proposes use. Mounting in horizontal and vertical position. Excellent hydraulic result. Perfect tightness in all conditions. Silent functionning.

    Application

    General uses: water distribution, building, pumping of fuel and pumping in general,etc.

    Body material: Brass
    PN (end): PN10
    Contact sealing: NNR
    Check valve material:
    Polyamide nitril
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA1103_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 414. (2142) Kägelbackventil-Brons-Säte: 316 Invändig gänga

    ,

    General Characteristics

    Range : from DN 1/4" up to DN 2"

    Application

    General uses : Water and saturated steam.

    Body material: Bronze
    PN: PN25
    Contact sealing:
    Stainless steel
    Swing material:
    Brass
    End: Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CS2142_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 414. (2143) Kägelbackventil – Brons Invändig gänga

    ,

    General Characteristics

    Range : from DN 1/4" up to DN 2" Respect the flow direction indicated on the body by the arrow. Horizontal position Bronze body with union cap. Stainless steel disc PTFE or stainless steel disc BSP cylindrical female threaded

    Application

    General uses : Heating, water distribution and watering.

    Body material: Bronze
    PN: PN25
    Contact sealing:
    PTFE
    Swing material:
    Brass
    End: Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CS2143_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA414. (3240) Kägelbackventil – Gjutjärn – Fläns

    ,

    General Characteristics

    Range : from DN15 to DN300. Extremely reliable. Wide range of applications. Simple and sturdy construction. Reliable and efficient functionning. Mounting all positions.

    Application

    General use : clean water, lightly charged, pumping, water piping, irrigation, non corrosive fluid.

    Body material: Cast iron
    PN (end): PN10/16
    Contact sealing:
    Stainless steel
    Swing material:
    Cast iron
    End: Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CS3240_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA414. (5261) Kägelbackventil – Stål – Fläns – PN40

    ,

    General Characteristics

    Range : from DN 15 to DN 200. Extremely reliable. Wide range of applications. Simple and sturdy construction. Reliable and efficient functionning. Mounting in all positions.

    Application

    General use : hot and cold water plants, steam plants, industrial technologies, neutral fluids, heat and refrigerating engineering.

    Body material: Steel
    PN (end): PN40
    Contact sealing:
    Stainless steel
    Swing material:
    Stainless steel
    Connection: Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CS5261_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 404. Backventil Disco – PN16

    ,

    General Characteristics

    Range : from DN 32 to DN 200. Short dimension. Excellent hydraulic result. High performance pressure and temperature. Between flange assembling. Mounting and functionning in horizontal and vertical position. Low head loss. Do not cause water hammer.

    Application

    General uses : heating system industry corrosif fluid,high pressure, high temperature, chemicals pumping,thermal fluid, irrigation, gas, water conveyance, steam.

    Body material: Brass
    PN (end): PN10/16
    Contact sealing: Metal/metal
    Check valve material:
    Stainless steel
    End:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA7442_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 403. Backventil Disco – PN40 – Syrafast stål

    ,

    General Characteristics

    Range : from DN 15 to DN 100. Short dimension. Excellent hydraulic result. High performance pressure and temperature. Between flange assembling. Mounting and functionning in horizontal and vertical position. Low head loss. Do not cause water hammer.

    Application

    General uses : heating system industry corrosif fluid,high pressure, high temperature, chemicals pumping,thermal fluid, irrigation, gas, water conveyance, steam.

    Body material: Stainless steel
    PN (end): PN40
    Contact sealing: Metal/metal
    Check valve material:
    Stainless steel
    Connection:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA6461_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 6170-BSP. Backventil – PN63 – syrafast stål – invändig gänga

    ,

    General Characteristics

    From DN 1/4" to DN 4". Conception according to ASME B16.34. 3 pieces spring type All positions (respect the flow direction indicated by the arrow). Metal / metal tightness. Stainless steel construction.Application

    Application

    General use :Chemical and pharmaceutical industries, petrochemical industries, hydraulic installation, compressed air

    Body material: Stainless steel CF8M
    PN (end): PN63
    Contact sealing: Metal/metal
    Check valve material:
    Stainless steel
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA6170BSP_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 6170-BW. Backventil – PN63 – syrafast stål – svetsända

    ,

    General Characteristics

    From DN 1/4" to DN 4". Conception according to ASME B16.34. 3 pieces spring type All positions (respect the flow direction indicated by the arrow). Metal / metal tightness. Stainless steel construction.

    Application

    General use :Chemical and pharmaceutical industries, petrochemical industries, hydraulic installation, compressed air

    Body material: Stainless steel CF8M
    PN (end): PN63
    Contact sealing: Metal/metal
    Check valve material:
    Stainless steel
    End:
    Bw
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA6170BW_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA407. Klaffbackventil PN16 – Stål

    ,

    General Characteristics

    Design in accordance with standard NF EN 14341. From DN 40 to DN 600. Mounting and working position in horizontal and vertical ascending fluid. Short length. Easy mounting. Low weight. Seat inside body. Low head loss. Seat : rubber/metal or metal/metal (On request). Option : O ring for face flanges.

    Application

    General uses: distribution and treatment of water (filtration, equipment of swimming pool) air conditioning, hydrocarbon, irrigation, etc.

    Body material: Steel
    PN (end): PN16
    Contact sealing: EPDM
    Swing material:
    Steel
    End:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB5440_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA408. Klaffbackventil PN16 – Syrafast stål

    ,

    General Characteristics

    Design in accordance with standard NF EN 14341. From DN 40 to DN 400. Mounting and working position in horizontal and vertical ascending fluid. Short length. Easy mounting. Low weight. Seat inside body. Low head loss. Seat : rubber/metal or metal/metal (On request). Option : O ring for face flanges.

    Application

    General uses: distribution and treatment of waters (filtration, equipment of swimming pool) air conditioning, hydrocarbon, irrigation, etc.

    Body material: Stainless steel
    PN (end): PN16
    Contact sealing: FPM
    Swing material:
    Stainless steel
    End:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB6441_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA412. Klaffbackventil PN10-40.

    , ,

    Body: CF8M
    Disc:
    CF8M
    STEM
    AISI316
    CAP
    AISI316
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/PA412.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA1102. Klaffbackventil – Mässing Invändig gänga

    ,

    General Characteristics

    From DN3/8" to DN 4". Vertical position with ascendant fluid or horizontal position. The flow direction is indicated by the arrow on the body. Cylindric threaded female BSP ends. Swing type. Tightness : EPDM from DN3/8" to DN2"; NBR from DN2"1/2 to DN4".

    Application

    General use: For all common fluids.

    Body material: Brass
    PN (end): PN10
    Contact sealing: EPDM
    Swing material:
    Brass
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB1102_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA2143. Klaffbackventil PN20 – Brons Invändig gänga

    ,

    General Characteristics

    From DN 1/2" to DN 2". Low head loss. Simplicity and facility in use. Low weight. Extremely reliable, noiseless.

    Application

    General uses: distribution and water treatment, irrigation, pumping in general, etc.

    Body material: Bronze
    PN (end): PN20
    Contact sealing: Nitril
    Swing material:
    Bronze
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB2143_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA6140. Klaffbackventil – Syrafast stål Invändig gänga

    ,

    General Characteristics

    From DN1/4" to DN 2". Vertical position with ascendant fluid or horizontal position The flow direction is indicated by the arrow on the body. Female cylindrical threaded BSP ends. Swing type. Metal / metal thickness.

    Application

    General use: Chemical and pharmaceutical industries, petrochemical industries, hydraulic installation.

    Body material: Stainless steel CF8M
    PN (end): PN16
    Contact sealing: Metal/metal
    Check valve material:
    Stainless steel
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB6140_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 3240. Klaffbackventil PN10 Metalltätande – Gjutjärn Fläns

    ,

    General Characteristics

    From DN 40 to 400, Mounting in horizintal and vertical ascending position. Simplicity in construction. Reliable and efficient functionning. Strong contruction materials.

    Application

    General uses: clean water, lightly charged, pumping, water piping, irrigation, gas, non corrosive fluid.

    Body material: Cast iron
    PN (end): PN10
    Contact sealing: Metal/metal
    Swing material:
    Cast iron
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB3240PN10_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 3240. Klaffbackventil PN16 Metalltätande – Gjutjärn Fläns

    ,

    General Characteristics

    From DN 40 to 400, Mounting in horizintal and vertical ascending position. Simplicity in construction. Reliable and efficient functionning. Strong contruction materials.

    Application

    General uses: clean water, lightly charged, pumping, water piping, irrigation, gas, non corrosive fluid.

    Body material: Cast iron
    PN (end): PN10/16
    Contact sealing: Metal/metal
    Swing material:
    Cast iron
    Connection:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB3240PN16_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 3243. Klaffbackventil PN16 – Gjutjärn Fläns

    ,

    General Characteristics

    From DN1/4" to DN 2". Swing check type. Vertical position with ascendant fluid or horizontal position. The flow direction is indicated by the arrow on the body. ISO PN16 flanges. Bolted bonnet.

    Application

    General use : Heating, water distribution and watering.

    Body material: EPDM
    PN (end): PN16
    Contact sealing: EPDM
    Swing material:
    Cast iron
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB3243_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 4251. Klaffbackventil PN25 – Segjärn Fläns

    ,

    General Characteristics

    From DN 40 to 800, Epoxy coated body and cover. Mounting in horizontal and vertical ascending position. Simplicity in construction. Total lift swing at opening. Reliable and efficient functionning. Strong contruction materials. Noiseless construction.

    Application

    General uses: clear and slightly charged water,  pumping, piping, irrigation, sewage systems.

    Body material: Ductile iron ggg40
    PN (end): PN25
    Contact sealing: EPDM
    Swing material:
    Ductile iron ggg40
    Connection:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB4251_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 4261. Klaffbackventil PN40 – Segjärn Fläns

    ,

    General Characteristics

    From DN 40 to 800, Epoxy coated body and cover. Mounting in horizontal and vertical ascending position. Simplicity in construction.Total lift swing at opening. Reliable and efficient functionning. Strong contruction materials. Noiseless construction.

    Application

    General use: clear and slightly charged water,  pumping, piping, irrigation, sewage systems.

    Body material: Ductile iron ggg40
    PN (end): PN40
    Contact sealing: EPDM
    Swing material:
    Ductile iron ggg40
    Connection:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB4261_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 3242. Klaffbackventil motvikt PN16 – Gjutjärn Fläns

    ,

    General Characteristics

    From DN 40 to 300, Mounting in horizintal and vertical ascending position. Simplicity in construction. Total lift swing at opening. Reliable and efficient functionning. Strong contruction materials. Noiseless construction.

    Application

    General uses: clean water, lightly charged, pumping, water piping, irrigation, gas, non corrosive fluid.

    Body material: EPDM
    PN (end): PN16
    Contact sealing: Stainless steel
    Swing material:
    Cast iron
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB3242_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 4243 CP. Klaffbackventil med motvikt PN10/16.

    ,

    General Characteristics

    Design according to NF EN 12334. Range : from DN 200 to DN 1000. Low head losses. Maintenance free. Mounting horizontally or vertically. Bearings self lubrificated. With or without counterweight

    Application

    General uses: drinkable water, dirty fluids, industry.

    Body material: Ductile iron
    PN (end): PN16
    Contact sealing:
    EPDM
    Swing material:
    Ductile iron
    End: Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CP4243_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 4241 CP. Klaffbackventil med hydraulisk motvikt PN16.

    ,

    General Characteristics

    Range : from DN 150 to DN 1000. Low head losses. Maintenance free. Complete sealing (double eccentric arrangement of disc). Mounting horizontally or vertically. Bearings self lubrificated. With or without counterweight.

    Application

    General uses: drinkable water, dirty fluids, industry.

    Body material: Ductile iron
    PN (end): PN16
    Contact sealing:
    EPDM
    Swing material:
    Ductile iron
    End: Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CP4241_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA410 (3240) Kulbackventil – Gjutjärn – Fläns

    ,

    General Characteristics

    Design in accordance with standard NF EN 12334. Range: From DN 40 to DN 600. Tight and working in horizontal or vertical position. Low head loss. Full bore thanks to the moving of the ball. Self-cleaning ball. Lifting hook in the cover for easy handling. Easy and quick disassembling cover. Cap allowing the takeoff of the ball. Body: oven baked epoxy 150 μm, RAL 5019.

    Application

    General uses: waste water, stickly fluids, raising water (purification, water treatment, pumping)

    Body material: Ductile iron
    PN: PN10
    Contact sealing:
    Nitril
    Ball material:
    Steel nitril coated
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CBL3240_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 411 (4140) Kulbackventil – Segjärn – invändig gänga

    ,

    General Characteristics

    Design in accordance with standard NF. EN 12334. BSP threaded connection. Tight and working in horizontal or vertical position. Low head loss. Full bare thanks to the moving of the ball. Self-cleaning ball. Easy and quick disassembling cover. Flat cover from DN25 to DN65 and round shape cover for DN80. Body: oven baked epoxy 150 µm, RAL 5019.

    Application

    General uses: waste water, stickly fluids, raising water (purification, water treatment, pumping)

    Body material: Ductile iron ggg40
    Ball material: Steel ball nbr coated
    Connection: Female bsp
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CBL4140_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 6190. Kulbackventil – PN400 – syrafast stål – Invändig gänga

    ,

    General Characteristics

    From DN 1/4" to DN 1". Fabrication according to ISO 9001 : 2008 Ball check valve with spring. All positions (respect the flow direction indicated by the arrow ) Metal / metal tightness. Stainless steel. Class 6000 Psi

    Application

    Usage général :Chemical and pharmaceutical industries, petrochemical industries, hydraulic installation, compressed air

    Body material: Stainless steel 316
    PN (end): PN400
    Contact sealing: Metal/metal
    Check valve material:
    Stainless steel
    End:
    Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA6190_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA6149 Kulbackventil – Syrafast stål – inv. gänga

    ,

    General Characteristics

    Ball type. Vertical position with ascendant fluid or horizontal position (respect the flow direction indicated by the arrow ). Female / female threaded. Bolted bonnet for easy maintenance. Stainless steel 316 body. FPM gasket. Check valve tested individually at 3 bars of compressed air

    Application

    Usage general : waste water, viscous and dense fluids.

    Body material: Stamped stainless steel 316
    PN: PN16
    Contact sealing:
    FPM
    Ball material:
    Aluminium FPM coated
    Connection: Female bsp
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CBL6149_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA6240. Kulbackventil – Syrafast stål – Fläns

    ,

    General Characteristics

    Design in accordance with standard NF EN 14341. Range : From DN50 to DN400. Tight and working in horizontal or vertical position. Low head loss. Full bore thanks to the moving of the ball. Self-cleaning ball. Easy and quick disassembly cover.

    Application

    General uses : Waste water, stickly fluids, raising water (purification, water treatment, pumping).

    Body material: Stainless steel
    PN (end): PN10
    Contact sealing:
    Nitril
    Ball material:
    Steel nitril coated
    End: Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CBL6240_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA3449. Dubbelklaff backventil PN16 – Gjutjärn Klaff: A316

    ,

    General Characteristics

    Range from DN50 to DN300. Vulcanized gasket. Hoisting eye from DN200. Short length, anti-corrosion stainless steel spring. PTFE bushing, weak head loss Vertical position with ascendant fluid or horizontal position ( respect the flow direction indicated by the arrow ) Between flanges ISO PN10/16. Anti-corrosion epoxy painting RAL003 50-100 microns thickness

    Application

    General use : Heating, water distribution, sea water.

    Body material: Cast iron
    PN (end): PN10/16
    Contact sealing:
    EPDM
    Swing material:
    Stainless steel 316
    Connection:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB3449_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA3448. Dubbelklaff backventil PN16 – Gjutjärn Klaff: Segjärn

    ,

    General Characteristics

    Range: From DN 40 to DN 800. Mounting between flanges. Working positions: horizontal and vertical ascending, and vertical descending position < DN 150. Mounting in accordance with many standards connections. Low head loss. Stainless steel spring technology to avoid fluid hammer.

    Application

    General uses: pumping, water supply, air conditioning installation.

    Body material: Cast iron
    PN (end): PN10/16
    Contact sealing:
    EPDM
    Swing material:
    Ductile iron
    Connection:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB3448N_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA3442. Dubbelklaff backventil PN16 – Segjärn Klaff: Brons

    ,

    General Characteristics

    Vulcanized gasket. Hoisting eye from DN200 to 600. Short length, anti-corrosion stainless steel spring. PTFE bushing, weak head loss Vertical position with ascendant fluid or horizontal position ( respect the flow direction indicated by the arrow ) Between flanges ISO PN10/16. Anti-corrosion epoxy painting RAL003 50-100 microns thickness Bronze-Aluminium disc

    Application

    General use : Heating, water distribution, sea water.

    Body material: Ductile iron en-gjs-400-15
    PN (end): PN16
    Contact sealing:
    EPDM
    Plates material:
    Aluminium bronze
    Connection:
    Between flanges PN10/16
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB3442_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA4450. Dubbelklaff backventil PN25 – Segjärn

    ,

    General Characteristics

    Design in accordance with standard NF EN 12334 and NF EN 14341. Range: From DN 40 to DN 800. Mounting between flanges. Working positions: horizontal and vertical ascending, and vertical descending position < DN 150. Mounting in accordance with many standards connections. Low head loss. Stainless steel spring technology to avoid fluid hammer.

    Application

    General uses: pumping, water supply, gas, air conditioning installation.

    Body material: Ductile iron
    PN (end): PN25
    Contact sealing:
    EPDM
    Swing material:
    Steel
    End:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB4450_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA6442. Dubbelklaff backventil PN16 – Syrafast stål

    ,

    General Characteristics

    Range : from DN 50 to DN 600. Vulcanized gasket. Hoisting eye from DN200 to DN600. Anticorrosion stainless tees spring. PTFE bushing. Weak head loss. Vertical position with ascendant fluid or horizontal position ( respect the flow direction indicated by the arrow ) Between flanges PN10/16 or PN25.

    Application

    General use: Chemical and pharmaceutical industries, petrochemical industries, hydraulic installation.

    Body material: Ductile iron
    PN (end): PN10/16
    Contact sealing:
    FPM
    Swing material:
    Stainless steel
    End:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB6442_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA6450. Dubbelklaff backventil PN25 – Syrafast stål

    ,

    General Characteristics

    Gamme : du DN 50 au DN 600. Mounting between flanges. Working position: horizontal and vertical ascending, and ertical descending position < DN 150. Low head loss. Stainless steel spring to avoid fluid hammer.

    Application

    General uses: pumping, water supply, gas, air conditionning installation.

    Body material: Stainless steel
    PN (end): PN25
    Contact sealing:
    FPM
    Swing material:
    Stainless steel
    End:
    Between flange
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CB6450_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 3241. Gjutjärn – PN16 – Fläns

    ,

    General Characteristics

    From DN 50 to DN 300. Fabrication according to EN 12334. Excellent tightness. Low head loss. Extremely reliable. Excellent hydraulic result. Simplicity in mounting and use.

    Application

    General uses: pumping, irrigation, industry, clean water.

    Body material: Cast iron
    PN (end): PN16
    Contact sealing: Nitril
    Check valve material:
    Cast iron
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA3241_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 3242. Gjutjärn – PN16 – Fläns – ACS

    ,

    General Characteristics

    From DN 50 to DN 600. All positions thanks to the stainless steel spring. Respect the flow direction indicated by an arrow on the body With steel strainer basket and 6 mm mesh. Weak head loss thanks to the cylindrical internal designing. Anti-corrosion epoxy internal and external painting blue color RAL 5017, 100 μ thickness. Bronze bushing to avoid blocking of the disc. Drilled boss on request for bypass or to check the thickness. Disc designed for a better hydrodynamism. Silent solution. Minimum back pressure for tightness : 0.2 bars.

    Application

    General use : water distribution.

    Body material: Cast iron
    PN (end): PN16
    Contact sealing: EPDM - ACS
    Check valve material:
    Cast iron
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA3242_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 4251. Segjärn – PN25 – Fläns

    ,

    General Characteristics

    From DN 50 to DN 600. Excellent tightness. Low head loss. Extremely reliable. Simplicity in mounting and use.

    Application

    General uses: pumping, irrigation, industry, clean water.

    Body material: Ductile iron
    PN (end): PN25
    Contact sealing: EPDM
    Check valve material:
    Ductile iron
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA4251_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA 4261. Segjärn – PN40 – Fläns

    ,

    General Characteristics

    From DN 50 to DN 600. Excellent tightness. Low head loss. Extremely reliable. Simplicity in mounting and use.

    Application

    General uses: pumping, irrigation, industry, clean water.

    Body material: Ductile iron
    PN (end): PN40
    Contact sealing: EPDM
    Check valve material:
    Ductile iron
    End:
    Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CA4261_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA3241. Bottenbackventil – Gjutjärn – Fläns

    ,

    General Characteristics

    From DN 50 to DN 150. From DN 200 to DN300 on request. Excellent tightness. Low head loss. Extremely reliable. Excellent hydraulic result. Simplicity in mounting and use.

    Application

    General uses : pumping, hydrocarbon, industry, clean water. Vertical mounting required

    Body material: Cast iron
    Pn (end): Pn10/16
    Contact sealing:
    Nitril
    Check valve material:
    Ductile iron
    End: Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CC3241_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA1142. Bottenbackventil – Mässing – Invändig gänga

    ,

    General Characteristics

    From to DN 3/8” to DN 4”. Low head loss. Excellent hydraulic results. Silent functionning.

    Application

    General uses : hydraulic or pneumatic system in industry, ideal for hot/cold water, oils, compressed air.

    Body material: Brass
    Pn (end): Pn10
    Contact sealing:
    Nbr
    Check valve material:
    Pvc
    End: Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/CC1142_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA X2101. Återströmnings-skydd – Brons – Inv. gänga

    ,

    General Characteristics

    Brass body, plastic "Air guard" - PN 10. Union BSP threaded ends - PN 10.

    Application

    Collective or industrial heating, sprinkler network, watering and irrigation,swimming pool installation, air treatment installation, water treatment with non authorized products by medical network, etc.

    Body material: Brass
    Pn (end):
    Pn10
    Contact sealing:
    Brass/rubber
    Spring material:
    Stainless steel
    End: Bsp female/female
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/X2101_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA X2102. Återströmnings-skydd – Brons – Utv. gänga

    ,

    General Characteristics

    Threaded backflow preventer for water. With control valve. 3 pièces BSP Male ends - PN 10. "WATTS" type model.

    Application

    Collective or industrial heating, sprinkler network, watering and irrigation, swimming pool installation, air treatment installation, water treatment with non authorized products by medical network, etc.

    Body material: Brass
    Pn (end):
    Pn10
    Contact sealing:
    Bronze / rubber
    Spring material:
    Stainless steel
    End: Male bsp
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/X2102_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]
  • PA X2203. Återströmnings-skydd – Brons – Fläns

    ,

    General Characteristics

    From DN65 to DN100. The flow direction is indicated by an arrow on the body Horizontal mounting position. Flange connection. Controlable. Low head loss. Brass check valves. With valves 1/2“ BSP.

    Application

    General use: water distribution

    Body material: Bronze
    Pn (end):
    Pn10
    Contact sealing:
    Bronze / rubber
    Spring material:
    Stainless steel
    End: Flanged
    [spb_row element_name="Row" wrap_type="standard-width" row_bg_type="color" color_row_height="content-height" bg_type="cover" parallax_image_height="content-height" parallax_image_movement="fixed" parallax_image_speed="standard" bg_video_loop="yes" parallax_video_height="window-height" row_top_style="none" row_bottom_style="none" parallax_video_overlay="none" row_overlay_opacity="0" remove_element_spacing="no" row_col_spacing="0" row_col_pos="default" row_col_equal_heights="no" row_expanding="no" row_animation="none" row_animation_delay="0" minimize_row="yes" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top: 50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" el_class="product-pdf-button" width="1/1" el_position="first last"] [spb_text_block animation="none" animation_delay="0" simplified_controls="yes" custom_css_percentage="no" padding_vertical="0" padding_horizontal="0" margin_vertical="0" custom_css="margin-top':50px;margin-bottom: 0px;" border_size="0" border_styling_global="default" width="2/3" el_position="first"]Ladda ner en PDF med mer utförlig information [/spb_text_block] [spb_button button_text="Ladda ner" button_size="standard" button_colour="accent" button_type="standard" rounded="no" button_dropshadow="no" button_icon="fa-arrow-circle-o-down" button_link="http://paventiler.se/wp-content/uploads/2014/12/X2203_EN.pdf" button_target="_blank" align="center" animation="none" animation_delay="0" width="1/3" el_position="last"] [/spb_row]